All Discussion Groups: Message List - Autodesk Inventor

Re: Flexible hose - lenght issue

Sun, 22 Nov 2009 09:10:58 +0000

Ok so with the info gleaned from Dennis's posts i got the hoses to behave quite nicely
only to find that after all that they dont animate in studio ! see attached pic

Tried all manner of constraints but they either conflict with...

Re: New computer specs

Sun, 22 Nov 2009 05:30:01 +0000

Yep, I would go with Win 7 64 bit.

A consumer level graphics card should work fine for what you list. Should be able to stay under $150 to $200 without much of a problem. This would be the Geforce line from Nvidia or the...

Re: Flexible hose - lenght issue

Sun, 22 Nov 2009 04:31:55 +0000

Thanks for the reply Dennis.

I think i may be trying to "run before i can walk" but i found the threads you had contributed to.
There's quite a few on chains and 2D adaptivity but i'm still not sure which route ( excuse the pun) to...

New computer specs

Sun, 22 Nov 2009 03:05:30 +0000

We are locked into IV 2008 for compatibility with our CAM program but we
have an unused IV 2010. I'm overdue for a new computer at home and would
like to use the IV 2010. I've been out of touch with IV developments for a
couple of...

Re: Part List for Frames

Sun, 22 Nov 2009 02:39:51 +0000

The parts lists and BOM thing is not used by many Inventor users in my opinion. This is probably due to lack of understanding of how to use this data or lack of training on how to use the data. In my opinion the Inventor software has very good BOM and...

Re: Frame Generator

Sun, 22 Nov 2009 02:31:02 +0000

Steve,

When you say FG Library, do you have a custom library? Are you upgrading to a newer version of Inventor?

Paul

Re: ADMS Installation Problem

Sun, 22 Nov 2009 01:24:42 +0000

Wayne you're a legend, your link solved the problem for me on my laptop running Vista Home Premium!!!

Many thanks

Grounding & Constraining Tube & Pipe Routes

Sun, 22 Nov 2009 01:24:20 +0000

How do you fully ground & constrain Tube & Pipe Routes?

The problem I have is after I complete My runs & routes & I have to make a dimension change in my Route,
my route does not stay vertical & horizontal, then I...

Re: Rotate a part or assembly a specific number of degrees?

Sun, 22 Nov 2009 01:23:35 +0000

Out of the box, I would tend to agree. In presentations however, you do
have precise view rotation.
--
Dennis Jeffrey, Autodesk Inventor Certified Expert
Autodesk Manufacturing Implementation Certified Expert.

Re: Unique Part Names... Really?

Sun, 22 Nov 2009 01:13:26 +0000

Let me help. Give me a call on Monday. I love challenges! :)
--
Dennis Jeffrey, Autodesk Inventor Certified Expert
Autodesk Manufacturing Implementation Certified Expert.
Instructor/Author/Sr. App Engr. Tel. (260) 399-6615